Video Tutorials

___________________________________________________________




________________________________________________

Redesigning This Page

Please Check Back Soon

 

______________________________________________________


Club members George, Hans  and myself give a demo on creating  jigsaw

puzzles to a few of the members from

The Gwinnett Woodworkers Association.

Looks like my teachings have rubbed off some.

This is a very lengthy video.

 

_________________________________________________________________

Use this to help reduce airborne dust particles in your shop.

_________________________________________________________________

Use a scrollsaw to make a decorative box.

 

_________________________________________________________________

This is a tutorial using CorelDraw to create a nameplate pattern

to be cut with a scrollsaw.

__________________________________________________________________

The following two videos show how to make

jigsaw puzzle patterns using CorelDraw.

>__________________________________________________________________

Part 2 in a series of jigsaw puzzles.

This video shows one type of many puzzles.

__________________________________________________________________

 

Making sharp corners using the scroll saw. Which side of the blade is important while cutting.

__________________________________________________________________

Placing starter holes on scroll saw patterns.

____________________________________________________________

 

This is the method that I use to apply and remove scrollsaw

patterns from wood.

 

__________________________________________________________

Tutorial #3 contains 4 tips…scrollsaw table legs, scrollsaw table smoothing, mag lite and footswitch.

 

______________________________________________________________

 

This video is part 1 in the puzzle series. In this you see how easy it is a make a traditional ‘ball and socket’ style jigsaw puzzle pattern.

 

_____________________________________________________________

TUTORIAL #2, TIPS #3 AND #4

Grinding the blade holder screws

and easy blade tensioning.

Great information that is not seen anywhere else.

Tutorial #1

Flat table and blade alignment.

A must see for setting up your scrollsaw. These tips are

not seen on other sites. 

 

 

_____________________________________________________________

 

I went against the rules and posted this video.

 

I cant explain why, but I like this guy. He gives a simple solution to an everyday question.  I will post more of his videos as they are found.

_____________________________________________________

Increase your website traffic with Attracta.com

11 Comments

  • Steve Good says:

    Hey Karl, nice job on the video with Hans. There are far too few videos out there with that type of good information. There will be a lot of scrollers get help from it. Again, nice job.

  • KTDESIGN says:

    Thanks Steve. Feel free to share it with your readers.

  • bob says:

    thanks. just the job

  • tina says:

    Very good video. I enjoyed it alot, and learned quite alot. Thank you! Keep up the good work.

  • Les says:

    Thank you, I enjoyed the Hans Mier Video
    Could you give me the Web site So I can view it again. If it is not on the web could I buy it? I learned more in the 2 hour video than going to 3 craft fairs.

  • KTDESIGN says:

    Thanks. You can find the video on my website at http://www.scrollsawvideo.com

    You can download RealPlayer ( a free program) to copy all videos from the internet. Just Google ‘download RealPlayer’ and the link will come up. I use this program fpr all my video downloads and it has a very good reputation. I will do a video this week on how to download the program.

  • David says:

    Hi Carl, Just watched your video on making puzzles. Very interesting, thanks for all your videos. Back to the puzzles. I have seen somewhere that you should point the blade teeth up while using this face down method. Is that correct?

  • KTDESIGN says:

    Yes, but only for this method in the video. Most puzzle making require the normal ‘tooth down’ position. Thanks, great question.

  • Robert Santorelli says:

    Thank you guys I’ve been learning a lot of little things that I would have never thought of thank you so much keep up the good work.
    Robert

  • Hi Karl,

    Meeting you at @ Atlanta Harwood…. was great, and I love your website … looking forward to learning more from you. Please call when you get a chance. 305 525-7626

    Regards

    Marvin Miller
    Woodworkeers Guild of Georgia
    Membership & Publicity

  • Joel says:

    I am relatively new to puzzle-making and have benefitted from your site. I have had some success with transferring art (photographs mostly) directly onto wood using a matte gel technique; anything I can produce with a laser printer is transferrable this way.

    I use the local office supply for color photography; so far I have limited myself to puzzles that are 8 x 10 inches or less. I dress the board by brushing on a decoupage medium (I have had good results with Mod-Podge) and then I cover the face with blue painter’s tape before I ‘attack’ it with a scroll saw.

    The results are certainly more rustic than a nice print properly affixed to a board as yours are, but a good result nonetheless and appreciated by the gift recipient. With a cell phone camera and laser printer, an event can be converted into a puzzle quickly and inexpensively. (Allowing for drying time between coats, snapshot-to-finished-puzzle can take as little as two days. It is engaging to children and it doesn’t cost much when they make mistakes.

    Thought I’d pass this along in the event you think this might prove a good way to teach your art form.

Leave a Reply

Your email address will not be published. Required fields are marked *